00:00After installing Chevrolet wheel spacers, the stock stock may cause the wheel not to
00:06sit first against the hub assembly. Actually, there are two situations in that you don't
00:13need to turn wheel stud for Chevrolet wheel spacers. Take a look at the inside of your
00:19wheels, then measure the cavity in your wheels to check out how much it will allow for the stud
00:25to go past the spacious outer surface. For example, if the depth of the wheel pocket
00:32is 10 mm and the stud length is 25 mm, then the minimum thickness of the wheel spacers
00:40that will perfectly fit is 15 mm. If the cavity is not deep enough, then you need to cut the
00:48stock stud.
00:48Is it safe to cut stock stud for 20 mm Chevrolet Cruze wheel spacers? Yes, as long as you operate
00:57correctly and ensure full firmware engagement, cutting stud to fit 20 mm Chevrolet Cruze wheel spacers
01:05is safe and reliable. The extended parts of the Chevrolet Cruze stock stud are not subject to
01:13process. This means you can cut that part down with no problems. Since the spacer is secured by the OEM
01:21stud and the wheel is custom by the provide stud of the wheel spacers, guiding OEM stud to fit 20
01:29mm
01:29Chevrolet Cruze wheel spacers will not certain the infrared engagement and weaken the strength.
01:36In addition, Bonnet's 20 mm Chevrolet Cruze wheel spacers provide ISO 12.9 wheel stud and ISO
01:43great 10 leg nut to ensure a strong connection. All Bonnet's wheel spacers are supplied with SDS and
01:51theory reports. These Bonnet's wheel studs are strong enough to bear more process. Bonnet's Chevrolet
01:58Cruze wheel spacers focus on quality and performance and are very striped with materials and manufacturing
02:05process. The wheel studs of wheel spacers are whole run ahead. This is because Bonnet's wheel spacers
02:13are made of high strength 6061P6 and 7075P6 aluminum alloy materials. The bordering process makes they are
02:23firmware process in the Chevrolet Cruze wheel spacers. You don't need to worry about any loss issues.
02:32No AI was used in the creation of this video. All editing was done manually. See you in the next
02:40video.
Comments