00:00A great way to improve the performance and appearance of your vehicle is by installing
00:041.5-inch wheel spacers.
00:06However, it is important to choose the right type of spacers and ensure that they are installed
00:12correctly.
00:13To avoid any negative effects, let's take a look at the correct installation steps.
00:19Use a cross-range to loosen the lug nudge on the side of the wheel in a diagonal sequence,
00:24but do not remove them completely.
00:27Using jets to support each end of the car is a better safety measure.
00:31Use a cross-range to remove the wheel side lug nudge.
00:35Remove the wheel of the hub and set it to the side.
00:38Look at the wheel hub assembly for rust.
00:40You can use a brake cleaner to remove them.
00:43Remove any rust and dirt from the wheel hub with a rug.
00:47Widen the entire surface to ensure it is smooth, because all of that surface may cause the
00:52wheel spacers to not fit perfectly with the hub.
00:55Install the bonus fault FT cooling 1.5-inch wheel spacers.
00:59Then install the matching like a nut.
01:02Tighten them with a torque wrench.
01:06A key advantage of bonus 1.5-inch wheel spacers is the FT cooling feature.
01:11These 1.5-inch wheel spacers are designed with petal-shaped grooves.
01:15The grooves allow the external cold air to flow continuously inside the spacer when it rotates.
01:20The air takes away the heat.
01:23After the dissipating heat for the braking system, all bonus 1.5-inch wheel spacers are forged.
01:29In addition, high-precision 1.5-inch wheel spacers provide high surface integrity,
01:35effectively guarantee safety, stability, and reliability, and ensure smooth installing experience.
01:43Install the rim and then install the stock nut.
01:45Use a torque wrench to tighten them on the wheel.
01:49Make sure they are secure.
01:52Slowly lower the car until the tires fully touch the ground and remove the jack.
01:57Use a torque wrench to tighten the lug nuts to the specific torque.
02:01Always tighten them in a diagonal sequence.
02:03This will ensure that the lug nuts work.
02:06The same operation is done for remaining wheels.
02:09Bonus recommend checking the use of 1.5-inch wheel spacers every 6 months,
02:14and checking the vehicle's operation to ensure safe driving.
02:21No AI was used in the creation of this video.
02:25All editing was done manually.
02:27See you in the next video.
Comments